38 SERVICE/MAINTENANCE REPLACING BULBS

Headlights Bulb Number: 2B1

To replace a sealed beam unit

• Remove the 4 screws (arrows) and take off headlight trim.

• Remove the 4 screws (arrows) and take off the headlight retainer.

• Take sealed beam out of support and disconnect electrical connector.

When installing a new sealed beam unit be sure the glass lugs engage securely in the support. A replaced headlight should always be reaimed.

License light Bulb Number: 67
• Use screwdriver to pry off license light lens/hood.

• Press bulb gently into holder, turn counter-clockwise and take out.

• Install new bulb.